TECHNICAL FEATURES

PRECAUTIONS FOR CLEANING AND MAINTENANCE

Cleaning and maintenance procedures can be carried out using a common neutral detergent and a direct water jet: the draining power of inclined surfaces and the presence of open joints between slabs encourages the collection of dirt near the discharge points.

For large surfaces, it is recommended the use of a washer-dryer and single-brush machines with soft nylon brushes.

Please note that a water patina, due to the surface tension feature of liquids, will tend to form on any outdoor surface even when inclined properly. To remove this patina and obtain the complete drying of the floor, it is recommended to push the water towards joints using a scrubbing-brush or to use a wet and dry vacuum cleaner.