The raised installation system for outdoor use by Atlas Concorde is a combination of LASTRA 20mm and three different types of polypropylene supports: fixed, adjustable and self-levelling.
Fixed supports, with a height of 12 mm, 15 mm or 20 mm, are the quickest and most economical solution. The adjustable supports, with variable heights ranging from 25 mm to 100 mm, allow for a uniform paving even in the case of uneven levels of the floor. The self-levelling supports, from 37.5 mm to 100 mm, allow for the compensation of uneven levels of the ground up to 5%. The grout lines between adjacent slabs are dependent on the thickness of spacers placed onto the supports and are of circa 3 mm.
Atlas Concorde recommends carrying out raised installation at a maximum height of 100 mm and using six supports per square meter.

Fixed
Height: from 12 mm to 20 mm
Adjustable
Height: from 25 mm to 100 mm
Self-levelling
Height: from 37.5 mm to 100 mm; compensation of uneven levels of the ground up to 5%

 

Technical features of supports

– Supports made of 100% recyclable material
– Resistant to acid and basic solutions
– Resistant to adverse weather agents
– Resistant to temperatures ranging from -30° to +120°

 

Self-levelling
Height: from 37.5 mm to 100 mm; compensation of uneven levels of the ground up to 5%.

 

Share