A proper cleaning consists in using a wet cloth or a sponge with an everyday neutral detergent for ceramic tiles of the kind FILA CLEANER and following the manufacturer instructions.

Avoid the use of waxing products, while the cleaning of large surfaces is best carried out using washer-drying machines.

Atlas Concorde recommends:

DAILY:
• Remove dust by sweeping the floor and using suitable brooms, woollen clothes and/or a vacuum-cleaner
• Wash the surface using FILA CLEANER (neutral low-residue detergent) diluted 1:200 (a small coffee cup in a bucket with 5 litres of water) using a wet cloth which must be frequently rinsed in the solution

WARNING:

If, after any kind of washing, the floor shows residual marks, wash the floor rinsing frequently and with an abundance of water.
Never use excessive amounts of detergent unless the floor is particularly dirty and correct rinsing of the floor must be carried out during cleaning.

AT REGULAR INTERVALS:
• Carry out a degreasing washing using FILA PS/87 diluted in water (1:20) (if possible in hot water as it increase effectiveness) then rinse with an abundance of water; or, where a descaling washing proves necessary, use FILA DETERDEK diluted in water (1:20) (if possible in hot water as it increase effectiveness) then rinse with an abundance of water

WARNING:

Should some areas of the floor remain dirty, repeat the descaling washing with a higher concentration of cleaner.
The operator in charge of this maintenance procedure must always test the solution on a small area of the floor.