Furniture

The Atlas Concorde Habitat washbasin is designed for wall installation on brackets. The installation manual is delivered together with the item.

Each Atlas Concorde Habitat table foresees the assembly of the legs and the subsequent fixing of the top to the table top. The installation manual is delivered together with the object. 

END-OF-SITE CLEANING   

The building site is considered finished when it is cleared of any tool/material deriving from the work. In order to reduce the risk of damaging the tiled surface it is necessary to protect it and avoid the presence of abrasive materials. After a few days, remove site residues with a commercial sponge such as Scotch-Brite® or with a scrubbing brush or single brush (for large surfaces). For floor coverings, use a neutral detergent diluted in warm water. For floors, use an acid detergent with a buffered action, in a variable dilution percentage depending on the type of surface (smooth or textured). It is important to protect any marble or metal inserts with adhesive tape beforehand. Then rinse thoroughly with clean warm water until all halos or residues in the interstices have been removed. If necessary, repeat the acid wash at higher concentrations except if marble or metal inserts are present. Avoid using diluted hardware acids. 

ROUTINE MAINTENANCE   

The use of a common neutral detergent diluted in water is recommended. Avoid using acidic, alkaline, waxing and/or impregnating agents and metal sponges (iron and steel sponges). In the case of heavier soiling or particularly textured surfaces, use an alkaline-based detergent and rinse after washing. For large surfaces, the use of scrubber-dryers is recommended. 

EXTRAORDINARY MAINTENANCE   

In the case of dirt resistant to ordinary cleaning, we recommend the use of an appropriate cleaning agent depending on the type of dirt:  

TYPE OF DIRT (resistant to ordinary maintenance)   

- Charcoal, lime efflorescence, chalk, metal marks, rust, graphite, wall temperas   

Use acid-based cleaning agents   

- Coke, coffee, wine, beer, ice cream   

Use alkaline-based cleaners   

- Resins, silicone or mechanical oils, candle wax, paint   

Use Solvents   

- Tyres, rubber soles, suction cups 

Use basic abrasive paste detergents

* Caution: acid-based products can corrode marble, granite, natural stone and metals, so avoid using them on decorations or inserts made from these materials.  

The cleanability characteristics of materials vary significantly for different installation methods, conditions of use, types of surfaces and environments. Generally speaking, as the non-slip characteristics of tiles increase, so do the cleaning difficulties. The professional operator in charge of maintenance and cleaning must always carry out a preliminary empirical check (possibly on a portion of material that has not been laid) for each individual type of intervention. In the event of particularly harsh conditions of use (e.g. machine shops or environments with a strong presence of oily residues and tyre tracks), of incorrect installation or cleaning carried out improperly, Atlas Concorde declines all responsibility regarding the effectiveness of the cleaning and maintenance operations. Atlas Concorde shall not be held liable for events, damages or defects due to incorrect installation, negligent cleaning and maintenance or unsuitable choice of the type of materials installed and adhesives used with respect to the destination. 

Atlas Concorde Habitat only uses wooden crate packaging for the handling of porcelain stoneware components. Each package can be handled with a forklift or with 2 or more manual operators. Each package can be stacked with others of the same size or larger. 

The production lead time of Atlas Concorde Habitat elements is 6 weeks from the order entered in the system. Each porcelain stoneware item is handmade in Italy and made to order. 

By going to your nearest retailer or visiting our showroom. As they are custom elements, you will have to fill in a simple data sheet provided by us summarising your needs. 

Atlas Concorde Habitat customisable elements offer the possibility of being built to the centimetre. All colours and finishes of the Atlas Concorde catalogue can be used. 

A team of experts will advise you on the type of intervention depending on its feasibility.

In our price lists you will find weights and dimensions of all standard Atlas Concorde Habitat elements. For custom-made elements weights and overall dimensions must be managed at the time of order.